• With this 4-axis profile machining center efficient aluminum and steel profile processing can be carried out in first-rate quality.

• For profile surface protection all work cycles such as milling, drilling, or tapping are carried out while the profile bar remains stationary. The axis-controlled cutter head is able to work the profile continuously at any position with all available tools from °0 to °180

• The on-board magazine which can be loaded with up to eight tools provides for short tool changing times and hence for optimum working cycles.

• For double bar and front processing a rotating angle head (°0/°90/°180/°270) with two different tools is available.

• Thanks to the separate working zones processing in shuttle operation is rendered possible.

• The electronic 4-axis industrial PC control for 2.5D application possesses a 15” color display and RJ45 10/100 MBit network connection.

TECHNICAL INFORMATION

Traverse X-axis: 6,400mm, 7,600mm, 9,700mm (additional lengths on request), V max. 65 m/min
Traverse Y-axis: 850 mm, V max. 60 m/min.
Traverse Z-axis: 650 mm, V max. 60 m/min.
Pivoting angle A-axis: 0 – °180 freely programmable in 1/°10 steps
Spindle speed max. 24,000 r.p.m.
Power output at spindle 9,5 kWS
Tool changer with eight tools, additional tool positions on request.

• -5axis profile machining center

• Designed for the efficient processing of profiles made from aluminum and steel.

• All working cycles such as milling, drilling, tapping, thread milling, notching, and sawing are carried out while the profile remains stationary for profile surface protection.

• -6sided machining. From below with rotating angle head (optional)

• Operating software with graphical 3D representation of the work pieces.

• The magazine can be equipped with 9 standard tools and 5 special tools (saw blade, angle routing head, and special cutters).

• Sturdy and low-wear direct drives on all axes allow rapid home positioning of the machining assembly

• Automatic clamp recognition and positioning.

• Thanks to the separate working zones processing in shuttle operation is rendered possible.

TECHNICAL INFORMATION

Traverse X-axis: 6,500mm, 7,800mm, 9,500mm, 10,800mm, 12,500 mm
(additional lengths on request), V max. 70 m/min.
Traverse Y-axis: 1,000 mm, V max. 40 m
Traverse Z-axis: 630 mm,V max. 40 m/min/min.
Pivoting angle A-axis: +/- °110 freely programmable in 1/°10 steps
Pivoting angle C-axis: +/- °182 freely programmable in 1/°10 steps
Power output at spindle 17,5 kW / S1
Spindle speed max. 24,000 r.p.m.
Cutter diameter 100 mm max.
Saw blade diameter 400 mm max.
Tool chuck HSK-63F

• The AXYZ 5000 Series CNC Router is designed to accommo date a wide range of materials and applications

• The 5000 Series machine bed width allows the machine to process materials up to 1842mm wide, and with standard lengths starting at 3048mm, you can easily process an oversized 5’ x 10’ sheet of wood, plastic, aluminum or other non-ferrous material

• The 5000 Series is driven by the high powered motion capability of the AXYZ

• A2MC control system.

• The A2MC delivers Seven Segment motion control and full NC tooling control to users, Making the A2MC Controller one of the most powerful control system available today.

TECHNICAL INFORMATION

Standard Processing Width: 1842mm
Standard Processing Length: 3048mm
Optional Additional Length: 610mm Increments
Standard Gantry Clearance /Z stroke: 150mm / 250mm
Optional Gantry Clearance: 200mm, 250mm, 300mm
Drive System: X, Y – Rack and Pinion Z – Ballscrew Direct drive servo motors on all axes.
Maximum Positioning Speed: 25m/min (higher speeds available
Control System: 7 Segment motion profile
FPGA processor for high speed complex calculations.
Dedicated true NC control – G and M codes
Network connection
4 GB onboard memory
AXYZ Smart Console